Browse Technologies:
1Touch® | AccuSet™ | AccuTemp™ | FilterCheck® | LifeLong™

Holmes® LifeLong™ Filters™ Logo

Filter Washing Procedure

  1. The water tray should be cleaned when you clean the filter. The water tray is a convenient way to carry the filter to prevent dripping.
  2. Mix 1 gallon warm tap water with 1 teaspoon concentrated antibacterial liquid dish washing soap.
  3. Fully submerge filter in soap solution for 15-20 minutes.
  4. LifeLong™ Filters™ Filter Washing Procedure
  5. Dunk filter in soap solution several times then gently press to release the soapy water. Be sure not to wring, pull or scrub filter as this will degrade the filter.
  6. Run under cool tap water until there is no soap remaining. Some discoloration may still be visible, this is normal and does not affect performance.
  7. Gently shake or press the filter to remove excess water.
  8. The filter can be put directly into the humidifier while still damp if it is to be used right away, or allow filter to dry completely if humidifier is to be stored.


back back to LifeLong™ Filters